The ultimate driver bit set. This is what you get - (All in tool steel):
- 1 x magnetic bit holder
- 1 x square to hex socket driver 50mm
- 1 x square to hex socket driver 25mm
- 1 x square to hex bit adaptor
Note that commonly used driver bits are supplied in greater numbers. Driver bits:
- Phillips # 0, 1, 2 (x5) & 3
- Posidrive # 0, 1, 2 (x5) & 3
- Square drive # 0, 1, 2 & 3
- Slotted 3, 4, 4.5, 5, 5.5, 6, 6.5, 7 & 8mm
- Pin drive (snake) # 4, 6, 8 &10
- Torx T8, T10, T15, T20, T25, T27, T30, T40 & T45
- Torque Set # 6, 8 & 10
- Tamper proof Torx (Metric) T8, T10, T15, T20, T25, T27 & T30
- Hex (Allen) Metric 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0 & 8.0mm
- Tri-Wing # 1, 2, 3 &4
- Clutch drive # 1, 2 &3
- Hex (Allen) Imperial 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 & 1/4
- Spline drive M5, M6 & M8
- Tamper Proof Allen (Metric) 2.0, 2.5, 3, 4, 5 & 6mm
- Tamper Proof Allen (Imperial) 5/32, 9/64, 1/8, 7/64, 3/32 & 5/64
- - Wing nut driver,
- - All in a snap lock case with clear markings to show where each bit rests.
Product Specifications
- Pack type : Bit set
- Bit type : Hex (Allen), Phillips head, Pozidrive, Square Drive, Flat Head (Slotted), Spanner / Pin Drive (Snake-Eyes), Torque (Offset Phillips), Torx, Tri-wing
- Bit size : Phillips 0, Phillips 2, Phillips 3, Pozidrive 0, Pozidrive 1, Pozidrive 3, Square 0, Square 1, Square 2, Square 3, Flat 3mm, Flat 5.5mm, Flat 6.5mm, Flat 8.0mm, Torque #6, Torque #8, Torque #10, T8 Torx, T10H Torx, T15 Torx, T20 Torx, 1.5mm Hex (Allen), 2.0mm Hex (Allen), 2.5mm Hex (Allen), 4.0mm Hex (Allen), 5.0mm Hex (Allen), 5.5mm Hex (Allen) Tamperproof, Tri-wing 1, Phillips 1, Tri-wing 2, Tri-wing 3, Clutch #1, Clutch #2, Clutch #3, M5 Bolt/Nut, M6 Bolt/Nut, M8 Bolt/Nut
- Number of tools in set : 100.0pc
- Storage Included : Carry Case
- Length : 19 cm
- Width : 13.2 cm
- Height : 4 cm
